74HC2G66DP,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC2G66 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 10V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 20ns, 27ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 175ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
74HC2G66DP,125 Overview
Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. Totally, there are 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 8 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. This multiplexer is composed of 2 circuits. Try searching for 74HC2G66 variants of the analog switch ic. Using only a single voltage supply, this analog switch requires 2V~10V voltage.
74HC2G66DP,125 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
74HC2G66DP,125 Applications
There are a lot of Nexperia USA Inc. 74HC2G66DP,125 Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Audio and video signal routing
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Communications systems
- Mechanical reed relay replacement
- Data switching
- Precision instrumentation
- Isolation
- Signal routing between systems
