74HC367PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | ONE FUNCTION WITH TWO BITS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC367 |
| Pin Count | 16 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 16 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverting |
| Number of Inputs | 6 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 2, 4 (Hex) |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC367PW,118 Overview
Logical driver uses a neat 16-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74HC series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the HC/UH family of parts. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 2, 4 (Hex) bits for each element. You can search "74HC367" for other related electrical components. In quiescent state, the electronic part uses 8μA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. Logical driver features ONE FUNCTION WITH TWO BITS to better serve the need. Digital buffer is characterized to have 6 inputs.
74HC367PW,118 Features
ONE FUNCTION WITH TWO BITS
74HC367PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC367PW,118 Buffers & Transceivers applications.
- Broadcast application
- Tuner
- Car alarm systems
- Wireless smart house
- Remote controls
- transmission relay
- Satellite communications networks
- interconnection between switches
- Wireless teaching
- Low power, low voltage systems
