74HC374DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 83MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC374DB,118 Overview
The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. A temperature of -40°C~125°C TAis used in the operation. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74HC series. There should be no greater frequency than 83MHzon its output. The list contains 1 elements. It consumes 4μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. The 74HC374 family contains this object. The power supply voltage is 5V. Input capacitance of this device is 3.5pF farads. The electronic device belongs to the HC/UHfamily. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. It has a clock edge trigger type of Positive Edge. It is designed with a number of bits of 8. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. A D flip flop with 2embedded ports is available. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The number of input lines is 8.
74HC374DB,118 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
74HC374DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC374DB,118 Flip Flops applications.
- ESD protection
- Clock pulse
- Single Down Count-Control Line
- Shift registers
- Latch
- Frequency Dividers
- Single Up Count-Control Line
- Data storage
- ESCC
- Control circuits
