74HC374N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 83MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC374N,652 Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. The package Tubecontains it. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~6V. It is operating at -40°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74HC series. Its output frequency should not exceed 83MHz Hz. The element count is 1 . T flip flop consumes 4μA quiescent energy. If you search by 74HC374, you will find similar parts. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded.
74HC374N,652 Features
Tube package
74HC series
74HC374N,652 Applications
There are a lot of NXP USA Inc. 74HC374N,652 Flip Flops applications.
- Frequency Dividers
- Latch
- Registers
- ATE
- Dynamic threshold performance
- Modulo – n – counter
- Test & Measurement
- Data transfer
- Automotive
- QML qualified product
