74HC377D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC377 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 83MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 240 ns |
| fmax-Min | 24 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HC377D,653 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. The Tape & Reel (TR)package contains it. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A 2V~6Vsupply voltage is required for it to operate. It is operating at -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74HC series. There should be no greater frequency than 83MHzon its output. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current. There have been 20 terminations. The 74HC377 family contains this object. The power supply voltage is 5V. This T flip flop has a capacitance of 3.5pF farads at the input. This D flip flop belongs to the family of HC/UH. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. In addition, WITH HOLD MODEis a characteristic of it.
74HC377D,653 Features
Tape & Reel (TR) package
74HC series
74HC377D,653 Applications
There are a lot of Nexperia USA Inc. 74HC377D,653 Flip Flops applications.
- Asynchronous counter
- Computing
- Common Clocks
- Data transfer
- Control circuits
- Buffer registers
- Guaranteed simultaneous switching noise level
- Bounce elimination switch
- Power down protection
- Supports Live Insertion
