74HC377N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC377 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 83MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| fmax-Min | 60 MHz |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HC377N,652 Overview
20-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. T flip flop uses Non-Invertedas the output. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates at a voltage of 2V~6V. In the operating environment, the temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74HCseries of FPGAs. It should not exceed 83MHzin terms of its output frequency. D latch consists of 1 elements. It consumes 8μA of quiescent current without being affected by external factors. There are 20 terminations,You can search similar parts based on 74HC377. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3.5pF farads. Electronic devices of this type belong to the HC/UHfamily. It is part of the FF/Latchesbase part number family. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be above 2V. This D flip flop is well suited for BULK PACK based on its reliable performance. A power supply of 2/6Vis required to operate it. Additionally, it is characterized by WITH HOLD MODE.
74HC377N,652 Features
Tube package
74HC series
2/6V power supplies
74HC377N,652 Applications
There are a lot of NXP USA Inc. 74HC377N,652 Flip Flops applications.
- Bounce elimination switch
- Data transfer
- Latch
- Balanced Propagation Delays
- Data Synchronizers
- Frequency division
- Buffered Clock
- Bus hold
- Cold spare funcion
- Power down protection
