74HC390N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | Counters |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC390 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Family | HC/UH |
| Direction | Up |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Propagation Delay (tpd) | 63 ns |
| Count Rate | 71MHz |
| RoHS Status | ROHS3 Compliant |
74HC390N,652 Overview
It is a device supplied in the 16-DIP (0.300, 7.62mm) package. It is configured with 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. An interconnection of 2elements is provided by wires. The total number of component pins is 16. There is a package in the form of Tube. The HC/UHfamily is derived from it. As a member of the 74HCseries, it is ideal for a wide range of applications. The logic type of Counter, Decade is adopted. The operating temperature should be set at -40°C~125°C. It adopts a mounting type of Through Hole. In the case of a supply voltage of [0], it operates more reliably. The array stores 4bits in each element. Further related parts may be found under the base part number 74HC390. In the case of the supply voltage (Vsup), it can be as low as 2V. It is possible to provide a voltage up to 6V (Vsup). This part is from the family [0].
74HC390N,652 Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
74HC390N,652 Applications
There are a lot of NXP USA Inc. 74HC390N,652 Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Analog multiplexing and demultiplexing
- Up Counters
- Binary counter/decoder
- ALGEBRAIC COMPUTATION
- Counter control/timers
- Time Out Timer for Consumer-Application Industrial Controls
- MULTIPLICATION
- counting/frequency sy nthesizers-BCD output
- SQUARING
