74HC390PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC390 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 315 ns |
| Turn On Delay Time | 315 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 71MHz |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC390PW,112 Overview
A 16-TSSOP (0.173, 4.40mm Width)package is used for this device. This configuration uses 16terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. 2 elements are interconnected in wires. In all, there are 16 pins on each component. There is a package in the form of Tube. Circuit components are connected with 16pins. To mount it, use the method of [0]. In this case, it belongs to the family of [0]. With its 74HCseries designation, it can be used for a range of applications. Logic type Counter, Decade is adopted. It is recommended to set the operating temperature to -40°C~125°C. The mounting type is Surface Mount. When the supply voltage is set to [0], it is able to operate with greater reliability. The array contains elements containing 4bits each. Further related parts may be found under the base part number 74HC390. For the device to operate, a voltage supply of 5Vis required. In the case of the supply voltage (Vsup), it can be as low as 2V. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts.
74HC390PW,112 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
74HC390PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC390PW,112 Counters & Dividers applications.
- Timing applications
- Frequency division
- ALGEBRAIC COMPUTATION
- Analog multiplexing and demultiplexing
- ANALOG SIGNAL PROCESSING
- LINEARIZATION
- Timers
- POWER COMPUTATION
- Dual Up Counters
- Time-delay circuits
