74HC390PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC390 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 315 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 315 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 71MHz |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC390PW,118 Overview
This is a device supplied in the 16-TSSOP (0.173, 4.40mm Width) package. This configuration uses 16terminations. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. The device has 2terminations. There are a total of 16 pins in all components. It is packaged in a manner consistent with Tape & Reel (TR). A circuit is connected to other components by 16pins. To mount it, use the method of [0]. In this case, it emerges as a member of the HC/UH family. This device is a member of the 74HCseries and is well suited for a wide range of applications. It is decided to use the logic type [0]. -40°C~125°Cshould be the operating temperature. This device is mounted in a Surface Mountmanner. When the supply voltage is set to [0], it is able to operate with greater reliability. The array consists of elements storing 4bits each. Under its base part number of [0], you will find additional related parts. For the device to operate, a voltage supply of 5Vis required. In the case of the supply voltage (Vsup), it can be as low as 2V. Typically, the supply voltage (Vsup) is limited to 6V. During quiescent mode, it consumes 8μA current.
74HC390PW,118 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
74HC390PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC390PW,118 Counters & Dividers applications.
- Dual Up Counters
- Counter control/timers
- Decade counter/decimal decode display (CD4017B）
- Divide-by"N" counters/frequency synthesizers
- TRUE RMS-TO-DC CONVERSION
- Frequency dividing circuits
- ALGEBRAIC COMPUTATION
- Signal gating
- Time Out Timer for Consumer-Application Industrial Controls
- Frequency dividers
