74HC393DB,118
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 125 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 210 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 107MHz |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HC393DB,118 Overview
In the 14-SSOP (0.209, 5.30mm Width)package, it is supplied. This configuration uses 14terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. There are 2 terminations on the device. A total of 14pins are present on all components. As a result, it is packaged in the way of a Tape & Reel (TR). As part of the circuit, there are 14pins used to connect other components. To mount it, use the method of [0]. In this case, it belongs to the family of [0]. This device is a member of the 74HCseries and is well suited for a wide range of applications. It is adopted that the logic type is [0]. Ideally, the operating temperature should be set to -40°C~125°C. This device is mounted in the Surface Mountposition. In the presence of the supply voltage of [0], it can operate more reliably. The array stores 4bits in each element. Its base part number, [0], contains more related parts. In order for it to operate, it requires a supply voltage of 5V . There is a minimum supply voltage (Vsup) of 2V volts. Typically, the supply voltage (Vsup) is limited to 6V. The device consumes quiescent current when it is at 8μA. A total of 1input lines are used to input binary data.
74HC393DB,118 Features
Embedded in the 14-SSOP (0.209, 5.30mm Width) package
4 bits per element
Operating supply voltage of 5V
74HC393DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC393DB,118 Counters & Dividers applications.
- Divide-by"N" counters/frequency synthesizers
- Frequency dividing circuits
- Dual Up Counters
- Timing applications
- Programmable decade counters
- SQUARING
- Frequency dividers
- Clocks
- DIVISION
- Divide-by-N counting
