74HC393PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 99MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 210 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 210 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 107MHz |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC393PW,118 Overview
This device is supplied in the 14-TSSOP (0.173, 4.40mm Width) package. It is configured using 14terminations. The supply voltage of 5V permits it to operate with full flexibility. There are 2 terminations on the device. The number of all component pins is 14. Packaging is based on Tape & Reel (TR). Circuit components are connected with 14pins. It is mounted using the way of [0]. It emerges as a member of HC/UH family. As a member of the 74HCseries, it is ideal for a wide range of applications. Logic type Binary Counter is adopted. It is recommended that the operating temperature be set to -40°C~125°C. It adopts a mounting type of Surface Mount. In the presence of the supply voltage of [0], it can operate more reliably. There are 4bits stored in each element of the array. Further related parts can be found under its base part number 74HC393. The device requires a supply voltage of [0]. The minimum supply voltage (Vsup) is as low as 2V. The frequency of the device is 99MHz. The maximum supply voltage (Vsup) is up to 6V. In the state of [0], it consumes quiescent current. There are 1 input lines used to input binary data in the form of on/off signals.
74HC393PW,118 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 99MHz
74HC393PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC393PW,118 Counters & Dividers applications.
- Decade counter/decimal decode display (CD4017B）
- Digital multiplexing and demultiplexing
- Divide-by-N counting
- counting/frequency sy nthesizers-BCD output
- Analog multiplexing and demultiplexing
- Timers
- ANALOG SIGNAL PROCESSING
- Control counters
- Counter control/timers
- Frequency dividing circuits
