74HC40105N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | REGISTER BASED; BUBBLE BACK 750NS |
| HTS Code | 8542.39.00.01 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC40105 |
| JESD-30 Code | R-PDIP-T16 |
| Function | Asynchronous |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Memory Size | 64 16 x 4 |
| Clock Frequency | 14MHz |
| Access Time | 34ns |
| Data Rate | 36MHz |
| Organization | 16X4 |
| Output Characteristics | 3-STATE |
| Memory Width | 4 |
| Memory Density | 64 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 71.428 ns |
| Height Seated (Max) | 4.7mm |
| Length | 21.6mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HC40105N,652 Overview
You will find FIFO memory chip in the 16-DIP (0.300, 7.62mm) package.This FIFO memory chip is packaged as a Tube .A FIFO chip's memory is 64 16 x 4 , which may be used to store applications and data.It is recommended that the temperature be kept at -40°C~125°C to ensure reliable operation.The mounting type of the FIFO memory is Through Hole .A 2V~6V supply voltage is required to power it.It is part of the 74HC series of memory logics.In addition, it is among the members of the 74HC40105 family.A supply voltage of 4.5V allows for high efficiency.The number of terminations in FIFO means is 16 .FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.A component normally has 2/6V power supplies attached to it.This gadget can also be used to generate REGISTER BASED; BUBBLE BACK 750NS .The FIFO memory IC's maximum supply voltage is set to 6V .For normal operation, keep the supply voltage (Vsup) above 2V .There is 14MHz frequency set for the clock of the FIFO memory IC.
74HC40105N,652 Features
64 16 x 4 memory size
74HC series
Best part number of 74HC40105
FIFOs category
Clock frequency of 14MHz
74HC40105N,652 Applications
There are a lot of NXP USA Inc. 74HC40105N,652 FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Wireless
- Code converters
- Routers
- IP Radio
- Computer networks
- Network switching/routing
- Laser Receiver System
- Magnetic memories
- Portable Information Devices
