74HC4016D,652
| Parameters | |
|---|---|
| Turn On Delay Time | 190 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 145 ns |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 28ns, 22ns |
| Channel-to-Channel Matching (ΔRon) | 9 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 22ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 135Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 9V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4016 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1nA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
74HC4016D,652 Overview
Packed in 14-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around -40°C~125°C TA. There are 14 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 9V voltage supply. This electronic part can be found in the 14 series. SPST - NO switching circuits are used in these analog switch ics. Using the 74HC4016 search parameter, you can discover variants of the switch. A 135Ohm internal resistance characterizes this multiplexer. Datasheets for 14 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 10V. Single supply type digital switch with a low cost. There should be 2V voltage fed to the electrical part below 2V. In order to operate this switch device, it would need a current of 1nA. Analogue multiplexers require a 2V~10V voltage to drain from a single voltage supply. 5V operating voltages can be used with this electrical part. A 4 input needs to be operated.
74HC4016D,652 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz
74HC4016D,652 Applications
There are a lot of Nexperia USA Inc. 74HC4016D,652 Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Frame Relay Equipment
- Cell phones
- Precision instrumentation
- Access Concentrators
- Avionics test equipment
- Relay Replacement
- Transmit
- Isolation
- Central office
