74HC4016N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 9V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4016 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 10V |
| Power Supplies | 2/6V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 28ns, 22ns |
| Channel-to-Channel Matching (ΔRon) | 9 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 22ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Normal Position | NO |
| Length | 19.025mm |
| RoHS Status | ROHS3 Compliant |
74HC4016N,652 Overview
Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -40°C~125°C TA. Totally, there are 14 terminations. A high-quality output is provided by the electrical component's 1 channels. With a 9V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 14 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. There are 4 circuits in this multiplexer. Use 74HC4016 to search for variants of the digital switches. There is Multiplexer or Switches analog multiplexer like this in the world. Analogue multiplexers require a 2V~10V voltage to drain from a single voltage supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
74HC4016N,652 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 160MHz
74HC4016N,652 Applications
There are a lot of NXP USA Inc. 74HC4016N,652 Analog Switches & Multiplexers ICs applications.
- Automotive applications
- E1 Multiplexer
- Cable PC
- Imaging
- Cell phones
- Cellular phones
- Audio and video signal routing
- Remote wireless modules
- High-Voltage
- DSLAMs
