Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Resistance |
135Ohm |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
9V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC4016 |
Pin Count |
14 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Max Supply Voltage |
10V |
Min Supply Voltage |
2V |
Operating Supply Current |
1nA |
Power Dissipation |
500mW |
Throw Configuration |
SPST |
Turn On Delay Time |
190 ns |
Number of Inputs |
4 |
Supply Type |
Single |
Turn-Off Delay Time |
145 ns |
-3db Bandwidth |
160MHz |
On-State Resistance (Max) |
120Ohm |
High Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
1μA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
On-state Resistance Match-Nom |
9Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
28ns, 22ns |
Channel-to-Channel Matching (ΔRon) |
9 Ω |
Crosstalk |
-60dB @ 1MHz |
Switch-on Time-Max |
28ns |
Switch-off Time-Max |
22ns |
Voltage - Supply, Single (V+) |
2V~10V |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
74HC4016PW,118 Overview
This electronic part is conveniently packaged in 14-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~125°C TA. A total of 14 terminations have been recorded. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 9V voltage supply. There is an electrical component included in the 14 series. Based on SPST - NO switching circuits, these analog multiplexers work. Use 74HC4016 to search for variants of the digital switches. As far as internal resistance is concerned, it has 135Ohm. You can find the functions of the 14 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 10V. A cost-effective Single supply type analogue multiplexer. 2V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 1nA. An analogue multiplexer drains from a single voltage supply at 2V~10V. This electrical part is compatible with 5V operating voltages. It is possible to operate 4 inputs.
74HC4016PW,118 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz
74HC4016PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4016PW,118 Analog Switches & Multiplexers ICs applications.
- Channel Banks
- T1/E1 Terminals
- FTTH
- USB 1.1 signal switching circuits
- PCMCIA cards
- Medical Instrumentation
- Audio and video switching
- Battery Powered Systems
- ATM
- Existing multiplexer applications (both fault-protected and nonfault-protected)