Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.209, 5.30mm Width) |
Number of Pins |
16 |
Supplier Device Package |
16-SSOP |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
74HC |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
2V~6V |
Base Part Number |
74HC4017 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Number of Bits |
5 |
Propagation Delay |
250 ns |
Turn On Delay Time |
375 ns |
Reset |
Asynchronous |
Logic Function |
Counter |
Direction |
Up |
Logic Type |
Counter, Decade |
Number of Bits per Element |
10 |
Trigger Type |
Positive, Negative |
Number of Input Lines |
1 |
Number of Output Lines |
10 |
Count Rate |
83MHz |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
74HC4017DB,118 Overview
A device of this type is supplied in a package of type [0]. In wires, 1elements are connected. It is packaged in a manner consistent with Tape & Reel (TR). In the circuit, there are 16pins that connect other parts. To mount it, use the method of [0]. Due to its membership in the 74HCseries, it is suitable for a variety of applications. A logic type of Counter, Decade is adopted. -40°C~125°Cis the recommended operating temperature. Mounting type Surface Mountis used. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. There are 10 bits stored in each element of the array. As far as the device is concerned, there are 5bits of information. You can find more related parts under its base part number of 74HC4017. To operate, it requires a supply voltage of 5V volts. The electrical characteristics remain stable at maximum temperature 125°Cfor extended periods. Temperature ranges are specified, with -40°Cset as a lower limit. The maximum voltage available for the device reaches 6V. A minimum voltage of 2Vis available for the device. A total of 1input lines are used to input binary data in the form of on/off signals. It has 10 output lines. A normal operation of this device is ensured by its use of 1circuits.
74HC4017DB,118 Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
10 bits per element
Operating supply voltage of 5V
74HC4017DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC4017DB,118 Counters & Dividers applications.
- Clocks
- counting/frequency sy nthesizers-BCD output
- Fixed or Programmable Frequency Division
- VHF, UHF, FM, AM, etc.
- MULTIPLICATION
- ALGEBRAIC COMPUTATION
- Divide-by-N counting
- Counter control/timers
- TRUE RMS-TO-DC CONVERSION
- Digital multiplexing and demultiplexing