74HC4020PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4020 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 225 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 225 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| fmax-Min | 20 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 109MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4020PW,112 Overview
This device is supplied in the 16-TSSOP (0.173, 4.40mm Width) package. For its configuration, 16terminations are used. This device is fully flexible due to the supply voltage of [0]. There are 1 terminations on the device. All component pins are equal to 16. Tubeis the packaging method used for this package. There are 16 pins going on to connect other parts in the circuit. Using [0], it can be mounted. In this case, it appears as a member of the HC/UH family. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. In this case, the logic type is set to [0]. Ideally, the operating temperature should be set to -40°C~125°C. Mounting type Surface Mountis used. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Each element in the array stores 14 bits. Under its base part number of [0], you will find additional related parts. To operate, it requires a supply voltage of 5V volts. In the case of the supply voltage (Vsup), it can be as low as 2V. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts. The device consumes a quiescent current of 8μA volts.
74HC4020PW,112 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Operating supply voltage of 5V
74HC4020PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC4020PW,112 Counters & Dividers applications.
- Divide-by"N" counters/frequency synthesizers
- Up Counters
- Clocks
- Communications Digital Frequency Synthesizers;
- Dual Up Counters
- Signal gating
- VHF, UHF, FM, AM, etc.
- Programmable binary and decade
- TRUE RMS-TO-DC CONVERSION
- ALGEBRAIC COMPUTATION
