74HC4024PW,112
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4024 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 300 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 300 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 7 |
| Trigger Type | Negative Edge |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Count Rate | 90MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HC4024PW,112 Overview
A 14-TSSOP (0.173, 4.40mm Width)package is used for this device. It is configured using 14terminations. The supply voltage of 5V enables it operate in a fully flexible way. The 1elements are connected by wires. All component pins are equal to 14. It is packaged in a manner consistent with Tube. A circuit is connected to other components by 14pins. It is mounted in the direction of [0]. In this case, it appears as a member of the HC/UH family. The 74HCseries is well suited to a number of uses. Binary Counteris selected as the logic type. It is recommended that the operating temperature be set to -40°C~125°C. In this case, it is mounted with a Surface Mounttype. When the supply voltage is set to [0], it is able to operate with greater reliability. It contains 7elements. Further related parts can be found under its base part number 74HC4024. The voltage source produces 2/6Vvoltage. To operate, the device requires a voltage of [0]. There is a minimum supply voltage (Vsup) of 2V volts. Up to 6Vis the maximum supply voltage (Vsup). The device consumes a quiescent current of 8μA volts.
74HC4024PW,112 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
7 bits per element
Operating supply voltage of 5V
74HC4024PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC4024PW,112 Counters & Dividers applications.
- DIVISION
- ANALOG SIGNAL PROCESSING
- VHF, UHF, FM, AM, etc.
- Signal gating
- ALGEBRAIC COMPUTATION
- Counter control/timers
- SQUARING
- Frequency dividing circuits
- Divide-by"N" counters/frequency synthesizers
- Decade counter/decimal decode display (CD4017B）
