74HC4024PW,118
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 90MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4024 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 300 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 300 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 7 |
| Trigger Type | Negative Edge |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
74HC4024PW,118 Overview
This device is supplied in the 14-TSSOP (0.173, 4.40mm Width) package. There are 14terminations used for configuring it. This device is fully flexible due to the supply voltage of [0]. In wires, 1elements are connected. A total of 14pins are available on all components. As a result, it is packaged as Tape & Reel (TR). Circuit components are connected by 14pins. To mount it, use the method of [0]. Initially, it appears to belong to the HC/UH family. The 74HCseries is well suited to a number of uses. Binary Counteris used as the logic type. -40°C~125°Cshould be the operating temperature. It adopts a mounting type of Surface Mount. It is able to operate with higher reliability when the supply voltage of 2V~6V is provided. The array consists of elements storing 7bits each. There are more related parts under the 74HC4024base part number. For its packaging, TAPE AND REELis employed. There is 2/6V voltage comes from the voltage source. In order to operate, it requires a voltage of [0]. It is possible to supply the device with the minimum supply voltage (Vsup) of 2V. Frequency 90MHzdetermines its operation. It is possible to supply voltages up to 6V volts (Vsup). It consumes quiescent current at 8μA.
74HC4024PW,118 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
7 bits per element
Operating supply voltage of 5V
Frequency of 90MHz
74HC4024PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4024PW,118 Counters & Dividers applications.
- TRUE RMS-TO-DC CONVERSION
- SQUARING
- Time Out Timer for Consumer-Application Industrial Controls
- Fixed and programmable counters greater than 10
- Dual Up Counters
- Divide-by"N" counters/frequency synthesizers
- Communications Digital Frequency Synthesizers;
- counting/frequency sy nthesizers-BCD output
- Digital multiplexing and demultiplexing
- ANALOG SIGNAL PROCESSING
