74HC4040DB-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100, 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC4040 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| Propagation Delay (tpd) | 225 ns |
| fmax-Min | 24 MHz |
| Count Rate | 98MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4040DB-Q100J Overview
This is a device supplied in the 16-SSOP (0.209, 5.30mm Width) package. This configuration uses 16terminations. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. The 1elements are connected by wires. The number of all component pins is 16. In this case, it is packaged as Tape & Reel (TR). It is mounted in the direction of [0]. In this case, it belongs to the family of [0]. Having been designed as a member of the Automotive, AEC-Q100, 74HCseries, it is well suited for use in a wide range of applications. Binary Counteris selected as the logic type. Ideally, the operating temperature should be set to -40°C~125°C. Having a mounting type of [0], it is suitable for installation. When the supply voltage is set to [0], it is able to operate with greater reliability. An array consists of 12bits for each element. It should be noted that there are more related parts under the 74HC4040base part number. To operate, it requires a supply voltage of 5V volts. Supply voltage (Vsup) can be as low as 2V. Up to 6Vis the maximum supply voltage (Vsup). The device consumes quiescent current when it is at 8μA.
74HC4040DB-Q100J Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
12 bits per element
Operating supply voltage of 5V
74HC4040DB-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC4040DB-Q100J Counters & Dividers applications.
- Time-delay circuits
- counting/frequency sy nthesizers-BCD output
- Frequency dividers
- Binary counter/decoder
- DIVISION
- Programmable decade counters
- Signal gating
- Programmable binary and decade
- Digital multiplexing and demultiplexing
- LINEARIZATION
