banner_page

74HC4046ADB,112

5V Phase Lock Loop (PLL) 21MHz 74HC4046 Clock Generators 74HC Series 16 Pins 16-SSOP (0.209, 5.30mm Width) 16 Terminals Surface Mount 3V~6V Tube


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74HC4046ADB,112
  • Package: 16-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 455
  • Description: 5V Phase Lock Loop (PLL) 21MHz 74HC4046 Clock Generators 74HC Series 16 Pins 16-SSOP (0.209, 5.30mm Width) 16 Terminals Surface Mount 3V~6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SSOP (0.209, 5.30mm Width)
Number of Pins 16
Operating Temperature -40°C~125°C
Packaging Tube
Published 1997
Series 74HC
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Phase Lock Loop (PLL)
Technology CMOS
Voltage - Supply 3V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 74HC4046
Pin Count 16
Operating Supply Voltage 5V
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 1
Nominal Supply Current 50mA
Frequency (Max) 21MHz
Input Clock
Ratio - Input:Output 2:3
PLL Yes
Differential - Input:Output No/No
Height Seated (Max) 2mm
Length 6.2mm
Width 5.3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

74HC4046ADB,112 Overview


This clock IC is packaged using the Tube method. 16-SSOP (0.209, 5.30mm Width) contains this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 16 terminations to be found. Basically, a voltage of 5V should be applied to this electronic frequency generator. There is a Clock PLL called Clock which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. It provides a maximum frequency of 21MHz. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators can take up to 6V of power as a maximum supply voltageSafety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2V. There are 3V~6V different supply voltages that can be provided for this RF synthesizer. Test statistics suggest setting the ambient temperature at -40°C~125°C, which is -40°C~125°C. As far as electrical parts go, this component can be classified as a Phase Lock Loop (PLL) component. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. These related electrical parts are available for the base part number 74HC4046. There are 16 pins that are available on the frequency generator. Electronic frequency generator can handle voltages up to 5V. An electronic part belonging to the 74HC series is being used here.

74HC4046ADB,112 Features


Available in the 16-SSOP (0.209, 5.30mm Width)
Supply voltage of 5V
Operating supply voltage of 5V

74HC4046ADB,112 Applications


There are a lot of Nexperia USA Inc. 74HC4046ADB,112 Clock Generators applications.

  • Clock signals to the high-speed Digital RF circuits
  • Bit synchronization
  • CPUs
  • Microwave point-to-point systems
  • Microwave radio
  • Frequency synthesis
  • Televisions
  • Space communucation
  • Ultrasound diagnosis
  • Pulsed digital systems

Write a review

Note: HTML is not translated!
    Bad           Good