74HC4051BQ-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140Ohm |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Time (Ton, Toff) (Max) | 51ns, 42ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4051BQ-Q100,11 Overview
As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Around -40°C~125°C TA is the extended operating temperature. It is injected into the electrical part body with 16 pins. It consists of 1 circuits. Using the 74HC4051 search parameter, you can discover variants of the switch. It has an internal resistance of 140Ohm. The functions of 16 pins can be found in the datasheets. A voltage higher than 10V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. 2V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 16μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. With dual power supplies, you should attach at least 1V. A voltage of 5V can be used to operate the electronic component. Operating 8 inputs is required. The series starts with Automotive, AEC-Q100.
74HC4051BQ-Q100,11 Features
16μA Supply Current
-3db Bandwidth: 180MHz
74HC4051BQ-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HC4051BQ-Q100,11 Analog Switches & Multiplexers ICs applications.
- Communication systems
- SONET/SDH ADM
- Microprocessor Controlled Analog Systems
- Automatic test equipment
- Digital Cross-Connects
- Intelligent PBX
- Routers
- Ultrasound
- FTTH
- Remote wireless modules
