74HC4051BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 345 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 290 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 51ns, 42ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Length | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4051BQ,115 Overview
As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. Circuits number 1 make up this analogue multiplexer. Search with 74HC4051 if you are looking for analog multiplexer variants. An switch multiplexer with 140Ohm internal resistance has a value of 140Ohm. Datasheets for functions of 16 pins are available. Users shouldn't supply more than 10V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 2V. In order to operate this switch device, it would need a current of 16μA. There is no problem with using dual supply voltage, but it should not exceed 5V. If you are using a dual power supply, you should attach at least 1V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. A voltage of 5V can be used to operate the electronic component. There are 8 inputs to be operated. In 180MHz-bandwidths, data can be transferred.
74HC4051BQ,115 Features
8 Channels
16μA Supply Current
Bandwidth: 180MHz
74HC4051BQ,115 Applications
There are a lot of Nexperia USA Inc. 74HC4051BQ,115 Analog Switches & Multiplexers ICs applications.
- HDTV
- Communication systems
- Audio and video switching
- Cross Connects
- Digital Cross-Connects
- Multiplexers
- Data Acquisition Systems
- Public switching systems
- Microprocessor Controlled Analog Systems
- Cable PC
