74HC4051D-Q100,118

51ns, 42ns 120Ohm Analog Switches 74HC4051 16 Pins 400nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HC4051D-Q100,118
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 161
Description: 51ns, 42ns 120Ohm Analog Switches 74HC4051 16 Pins 400nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	1999
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	140Ohm
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Base Part Number	74HC4051
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	10V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	16μA
Power Dissipation	500mW
Propagation Delay	60 ns
Turn On Delay Time	90 ns
Logic Function	Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±)	2V~10V ±1.5V~5V
Supply Type	Dual, Single
Max Dual Supply Voltage	5V
-3db Bandwidth	180MHz
On-State Resistance (Max)	120Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	2.5V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	9Ohm
Switch Time (Ton, Toff) (Max)	51ns, 42ns
Number of Output Lines	8
Channel-to-Channel Matching (ΔRon)	6 Ω
Switch-on Time-Max	520ns
Switch-off Time-Max	435ns
Drain to Source Resistance	180Ohm
Length	9.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week

74HC4051D-Q100,118 Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 16 series. 1 circuits are used in this analogue multiplexer. Try searching for 74HC4051 variants of the analog switch ic. In this multiplexer, the internal resistance is 140Ohm. For details about the functions of 16 pins, please refer to the datasheets. Multiplexers should not be powered above 10V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. 2V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 16μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 1V. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. A voltage of 5V can be used to operate the electronic component. The Drain to Source resistance of this electronic component is 180Ohm. The Automotive, AEC-Q100 series includes it.