74HC4051DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 345 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 290 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 2.5V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 51ns, 42ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4051DB,112 Overview
Packed in 16-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature extended to -40°C~125°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. As part of its design, the 16 series is equipped with this electronic component. 1 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4051. There is 140Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. Users shouldn't supply more than 10V voltage to the switch device. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2V. It would be sufficient to run this analogue multiplexer with 16μA current. Despite this switch device's dual supply capability, its voltage should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The electrical part can be operated at 5V voltage levels. It is possible to operate 8 inputs. A 180MHz-bandwidth can be used for data transfer.
74HC4051DB,112 Features
8 Channels
16μA Supply Current
Bandwidth: 180MHz
74HC4051DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC4051DB,112 Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Wireless Local Loop
- Central office
- Microprocessor Controlled Analog Systems
- Isolation
- Frame Relay Equipment
- DVD-R
- MP3 players
- Industrial control systems
- Medical
