74HC4051DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 345 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 290 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 51ns, 42ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4051DB,118 Overview
Packed in 16-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. There are 1 circuits in this multiplexer. Try searching for 74HC4051 variants of the analog switch ic. The internal resistance of this digital multiplexer is 140Ohm. For functions related to 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 10V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 16μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. If you are using dual power supplies, you should attach at least 1V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages range from 5V. It is possible to transfer data over a 180MHz-bandwidth.
74HC4051DB,118 Features
8 Channels
16μA Supply Current
Bandwidth: 180MHz
74HC4051DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC4051DB,118 Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Routers
- Avionics
- 65 V DACs
- PBX interfaces
- Mechanical reed relay replacement
- Industrial and process control systems
- High-Voltage
- Residential Gateways, Home Gateway/Router
- Precision test equipment
