74HC4051N,652
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 51ns, 42ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 87ns |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 4.2mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 2/6GND/-6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
74HC4051N,652 Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Through Hole. Multiplexers and demultiplexers have a ratio of 8:1. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. This multiplexer is composed of 1 circuits. 74HC4051 can be used to search for analog multiplexer variants. In this analog multiplexer, the value is Multiplexer or Switches. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
74HC4051N,652 Features
8 Channels
-3db Bandwidth: 180MHz
74HC4051N,652 Applications
There are a lot of NXP USA Inc. 74HC4051N,652 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Industrial and process control systems
- Precision data acquisition
- Residential Gateways, Home Gateway/Router
- Microwave transmission systems
- Communication systems
- 65 V DACs
- PBXs
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
