74HC4051PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 51ns, 42ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-off Time-Max | 87ns |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
74HC4051PW,112 Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4051. For functions related to 16 pins, please refer to the datasheets. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.
74HC4051PW,112 Features
8 Channels
-3db Bandwidth: 180MHz
74HC4051PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC4051PW,112 Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Precision data acquisition
- Fault Tolerant Systems
- USB 1.1 signal switching circuits
- PDAs
- Industrial
- Isolation
- Avionics
- Fiber to the Home
