74HC4052BQ-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 210Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74HC4052 |
| Output | COMMON OUTPUT |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 320μA |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 150Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 58ns, 48ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 490ns |
| Switch-off Time-Max | 375ns |
| Normal Position | NO |
| Signal Current-Max | 0.05A |
| Height Seated (Max) | 1mm |
| Length | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4052BQ-Q100,11 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-VFQFN Exposed Pad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 4:1. Temperatures around -40°C~125°C TA are extended for operation. There are 16 terminations totally. Due to its 4 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. The electrical component body receives 16 pins. Multiplexers built on a SP4T switching circuit are built. A total of 2 circuits make up this switch device. Try searching for 74HC4052 variants of the analog switch ic. This digital multiplexer has 210Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. In normalcircumstances, users should not exceed 10V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2V. In order to operate this switch device, it would need a current of 320μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. When using dual power supplies, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A total of COMMON OUTPUT outputs are available on this analog switch ic. Automotive, AEC-Q100 is a series number.
74HC4052BQ-Q100,11 Features
4 Channels
Switch Circuit: SP4T
320μA Supply Current
-3db Bandwidth: 180MHz
74HC4052BQ-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HC4052BQ-Q100,11 Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Power routing
- 65 V DACs
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Low-Voltage
- USB 1.1 signal switching circuits
- Mechanical reed relay replacement
- Avionics and Military Systems
- Microprocessor Controlled Analog Systems
- Audio and video routing
