Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.209, 5.30mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
210Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC4052 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Channels |
8 |
Number of Circuits |
2 |
Max Supply Voltage |
10V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
320μA |
Power Dissipation |
500mW |
Propagation Delay |
15 ns |
Turn On Delay Time |
105 ns |
Logic Function |
Demultiplexer, Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~10V ±1.5V~5V |
Supply Type |
Dual, Single |
Bandwidth |
180MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
74 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
150Ohm |
Min Dual Supply Voltage |
1V |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
2μA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
On-state Resistance Match-Nom |
6Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
58ns, 48ns |
Channel-to-Channel Matching (ΔRon) |
6 Ω |
Crosstalk |
-60dB @ 1MHz |
Switch-on Time-Max |
69ns |
Switch-off Time-Max |
57ns |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74HC4052DB,118 Overview
Presented in 16-SSOP (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Increasing operating temperature to around -40°C~125°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. Circuits based on SP4T switching are used to construct these analog switch ics. The multiplexer consists of 2 circuits. Look for analog switch ic variants by searching with 74HC4052. It has an internal resistance of 210Ohm. For details about the functions of 16 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 10V. A analog switch ic that has a cost-effective Dual, Single supply type. A low voltage of 2V should be applied to the electronic component. This digital switch can be operated with a current of 320μA. For this switch, a dual supply voltage is feasible, but it must not exceed 5VIf you are using dual power supplies, you should attach at least 1V. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. Operating voltages of 5V are compatible with the electrical part. This switch operates within the bandwidth of 180MHz.
74HC4052DB,118 Features
8 Channels
Switch Circuit: SP4T
320μA Supply Current
Bandwidth: 180MHz
74HC4052DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC4052DB,118 Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Automatic test equipment
- SONET/SDH ADM
- Precision data acquisition
- HDTV
- Signal routing between systems
- Relay replacements
- Avionics
- PDH Multiplexers
- Cellular phones