74HC4052N,652
| Parameters | |
|---|---|
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4052 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 58ns, 48ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 69ns |
| Switch-off Time-Max | 57ns |
| Length | 19.05mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
74HC4052N,652 Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a ratio of 4:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 16. The electronic part delivers high-quality output through its 4 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this multiplexer. Try searching for the analog switch ic with 74HC4052 if you are looking for variants. There is a standard Multiplexer or Switches analogue multiplexer here. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.
74HC4052N,652 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 180MHz
74HC4052N,652 Applications
There are a lot of NXP USA Inc. 74HC4052N,652 Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Data switching
- Routers
- Relay Replacement
- Video signal routing
- Remote wireless modules
- Multi-Line E1 Interface Cards
- PCMCIA cards
- Frame Relay Equipment
- Signal routing between systems
