74HC4052PW-Q100,11

58ns, 48ns SP4T 150Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 2μA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HC4052PW-Q100,11
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 983
Description: 58ns, 48ns SP4T 150Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 2μA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	210Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74HC4052
Output	COMMON OUTPUT
Pin Count	16
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	10V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	320μA
Power Dissipation	500mW
Propagation Delay	75 ns
Turn On Delay Time	90 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~10V ±1.5V~5V
Supply Type	Dual, Single
Max Dual Supply Voltage	5V
-3db Bandwidth	180MHz
On-State Resistance (Max)	150Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Number of Input Lines	4
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	58ns, 48ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	225Ohm
Normal Position	NO
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74HC4052PW-Q100,11 Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 16 series that this electronic component is included. SP4T switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 2. 74HC4052 can be used to search for analog multiplexer variants. It has an internal resistance of 210Ohm. Datasheets for functions of 16 pins are available. A voltage higher than 10V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 2V voltage fed to the electrical part below 2V. The switch device would be able to operate with 320μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 5VIf you are using a dual power supply, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A total of COMMON OUTPUT outputs are available on this analog switch ic. In order to operate the 8 inputs, there are several steps to follow. Drain to Source resistance for this electronic component is 225Ohm. Automotive, AEC-Q100 is a series number.