74HC4052PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 210Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4052 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 320μA |
| Power Dissipation | 500mW |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 105 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 74 ns |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 150Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 58ns, 48ns |
| Channel-to-Channel Matching (ΔRon) | 6Ohm |
| Crosstalk | -60dB @ 1MHz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4052PW,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 4:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. By its 8 channels, the electronic component provides high-quality output. A SP4T switching circuit is used to build these analog multiplexers. 2 circuits are used in this analogue multiplexer. Search with 74HC4052 if you are looking for analog multiplexer variants. It has an internal resistance of 210Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexers should not be powered above 10V in normal situations. An effective Dual, Single supply digital multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 320μA current would suffice. Despite this switch device's dual supply capability, its voltage should not exceed 5V. You should attach at least 1V voltage if you are using dual power supply. This electrical part is compatible with 5V operating voltages. Operating the 8 inputs requires 8 inputs. There are 180MHz bandwidths for data transfer. It is not recommended to operate the switches in an environment with a temperature higher than 125°C. A analog switch ics with 2 outputs is included. 16-TSSOP package is offered by suppliers.
74HC4052PW,112 Features
8 Channels
Switch Circuit: SP4T
320μA Supply Current
-3db Bandwidth: 180MHz
Bandwidth: 180MHz
74HC4052PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC4052PW,112 Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Precision test equipment
- Audio and video routing
- High speed data transmission line cards
- Ultrasound
- Relay Replacement
- Channelized and Unchannelized DS3 applications
- Precision instrumentation
- Channel Banks
- Multiplexers
