74HC4052PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC4052 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 58ns, 48ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 69ns |
| Switch-off Time-Max | 57ns |
| Drain to Source Resistance | 225Ohm |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
74HC4052PW,118 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 16 terminations. By its 4 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 4.5V, it should be turned on and run. This electrical component is included in the 16 series of products. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with 74HC4052. Please refer to the datasheets for 16 pins functions. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. Drain to Source resistance for this electronic component is 225Ohm.
74HC4052PW,118 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 180MHz
Drain-to-Source resistance: 225Ohm
74HC4052PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4052PW,118 Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Precision data acquisition
- Sample-and-hold systems
- PDAs
- Audio and video switching
- Multiplexers
- HDTV
- Channelized and Unchannelized DS3 applications
- SDH/SONET multiplexers
- Existing multiplexer applications (both fault-protected and nonfault-protected)
