74HC4053BQ-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140Ohm |
| Base Part Number | 74HC4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Circuits | 3 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 170MHz |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| RoHS Status | ROHS3 Compliant |
74HC4053BQ-Q100,11 Overview
Packed in 16-VFQFN Exposed Pad, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~125°C TA. Into the electrical component body are injected 16 pins. A SPDT switching circuit is used for these analog switches. The multiplexer consists of 3 circuits. If you are looking for variants of the digital switch, trying search with 74HC4053. The internal resistance of this digital multiplexer is 140Ohm. Please refer to the datasheets for 16 pins functions. It is generally not recommended to supply a voltage higher than 10V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. 2V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 16μA current. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 1V. 5V operating voltages are supported by the electronic component. Operating the 6 inputs requires 6 inputs. The series starts with Automotive, AEC-Q100.
74HC4053BQ-Q100,11 Features
Switch Circuit: SPDT
16μA Supply Current
-3db Bandwidth: 170MHz
74HC4053BQ-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HC4053BQ-Q100,11 Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Low-Voltage
- Transmit
- New designs requiring multiplexer functions
- 65 V DACs
- DSLAMs
- Audio and video signal routing
- Microprocessor Controlled Analog Systems
- Precision data acquisition
- Avionics
