Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
200.686274mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
Automotive, AEC-Q100 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
140Ohm |
Max Power Dissipation |
500mW |
Base Part Number |
74HC4053 |
Pin Count |
16 |
Number of Circuits |
3 |
Max Supply Voltage |
10V |
Min Supply Voltage |
2V |
Operating Supply Current |
16μA |
Power Dissipation |
500mW |
Propagation Delay |
60 ns |
Turn On Delay Time |
90 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
2V~10V ±1.5V~5V |
Supply Type |
Dual, Single |
Max Dual Supply Voltage |
5V |
-3db Bandwidth |
170MHz |
On-State Resistance (Max) |
120Ohm |
Min Dual Supply Voltage |
1V |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Number of Input Lines |
2 |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
31ns, 29ns |
Channel-to-Channel Matching (ΔRon) |
6 Ω |
Crosstalk |
-60dB @ 1MHz |
Drain to Source Resistance |
180Ohm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74HC4053D-Q100,118 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -40°C~125°C TA. There are 16 pins injected into the electronic part body. Circuits based on SPDT switching are used to construct these analog switch ics. This multiplexer is composed of 3 circuits. Use 74HC4053 to search for variants of the digital switches. Analog switches have 140Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. In normalcircumstances, users should not exceed 10V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer to operate, 16μA current would be sufficient. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. A dual power supply should have at least 1V voltage attached. Among the inputs that can be operated are the 6 inputs. This electronic component presents a Drain to Source resistance of 180Ohm. The Automotive, AEC-Q100 series contains it.
74HC4053D-Q100,118 Features
Switch Circuit: SPDT
16μA Supply Current
-3db Bandwidth: 170MHz
Drain-to-Source resistance: 180Ohm
74HC4053D-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HC4053D-Q100,118 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Precision data acquisition
- CSU
- Remote wireless modules
- Microwave transmission systems
- High-Voltage
- Medical Instrumentation
- PBXs
- Mechanical reed relay replacement
- Automatic test equipment