74HC4053DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 220 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 210 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 2.5V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Height Seated (Max) | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4053DB,112 Overview
This electronic part is conveniently packaged in 16-SSOP (0.209, 5.30mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. The electronic part body is injected with 16 pins. SPDT switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 3. 74HC4053 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 140Ohm. For details about the functions of 16 pins, please refer to the datasheets. Users shouldn't supply more than 10V voltage to the switch device. An effective Dual, Single supply digital multiplexer. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 16μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. It is recommended that you attach at least 1V to your dual power supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. This electrical part is compatible with 5V operating voltages. Operating 6 inputs is required. There are 170MHz bandwidths for data transfer.
74HC4053DB,112 Features
1 Channels
Switch Circuit: SPDT
16μA Supply Current
Bandwidth: 170MHz
74HC4053DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC4053DB,112 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Mechanical reed relay replacement
- High-Voltage
- PBXs
- MP3 players
- DSUs
- Communications systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Data switching
- Digital Cross-Connects
