Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Published |
2010 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Terminal Finish |
NICKEL PALLADIUM GOLD |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
6V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC4053 |
Pin Count |
16 |
JESD-30 Code |
R-PDIP-T16 |
Qualification Status |
Not Qualified |
Power Supplies |
2/6GND/-6V |
Number of Channels |
1 |
Number of Circuits |
3 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Voltage - Supply, Single/Dual (±) |
2V~10V ±1.5V~5V |
-3db Bandwidth |
170MHz |
On-State Resistance (Max) |
120Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
On-state Resistance Match-Nom |
8Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
31ns, 29ns |
Channel-to-Channel Matching (ΔRon) |
6 Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.025A |
Height Seated (Max) |
4.7mm |
Length |
21.6mm |
RoHS Status |
ROHS3 Compliant |
74HC4053N,652 Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is provided by advanced packaging method Tube. Mounted in Through Hole is this multiplexer. 2:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 6V voltage supply. There is an electrical component included in the 16 series. Circuits based on SPDT switching are used to construct these analog switch ics. 3 circuits are used in this analogue multiplexer. Search with 74HC4053 if you are looking for analog multiplexer variants. In this analog multiplexer, the value is Multiplexer or Switches. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module.
74HC4053N,652 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 170MHz
74HC4053N,652 Applications
There are a lot of NXP USA Inc. 74HC4053N,652 Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Medical
- Audio/video switches
- 65 V DACs
- Relay Replacement
- DVD-R
- Cell phones
- DSLAMs
- Access Concentrators
- Routers