74HC4053PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4053 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| -3db Bandwidth | 170MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
74HC4053PW,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~125°C TA extended. In total, there have been 16 terminations. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. Electronic part bodies are injected with 16 pins. Based on SPDT switching circuits, these analog multiplexers work. A total of 3 circuits make up this switch device. 74HC4053 can be used to search for analog multiplexer variants. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board.
74HC4053PW,112 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 170MHz
74HC4053PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC4053PW,112 Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- Imaging
- RGB switches
- Cable PC
- Digital cross connects (DSX-1)
- PDH Multiplexers
- Precision instrumentation
- Switching Systems
- Industrial control systems
- SDH/SONET multiplexers
