74HC4053PW,118
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1.5V~5V |
| -3db Bandwidth | 170MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Drain to Source Resistance | 180Ohm |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
74HC4053PW,118 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. A total of 3 circuits make up this switch device. Using the 74HC4053 search parameter, you can discover variants of the switch. For functions related to 16 pins, please refer to the datasheets. A Drain to Source resistance of 180Ohm is shown for this electronic part.
74HC4053PW,118 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 170MHz
Drain-to-Source resistance: 180Ohm
74HC4053PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4053PW,118 Analog Switches & Multiplexers ICs applications.
- RGB switches
- Cross Connects
- Industrial control systems
- Video signal routing
- Precision data acquisition
- Cellular phones
- SDH/SONET multiplexers
- Communication systems
- PCMCIA cards
- Fiber In The Loop (FITL)
