74HC4060DB-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 14 |
| Propagation Delay | 450 ns |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Unidirectional |
| Logic Type | Binary Counter |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 95MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74HC4060DB-Q100J Overview
The device is packaged in the 16-SSOP (0.209, 5.30mm Width)type. In order to configure it, it uses 16terminations. 5Vis fully flexible due to its voltage supply. There are 1 terminations on the device. The number of all component pins is 16. As a result, it is packaged as Tape & Reel (TR). Circuit components are connected by 16pins. The way of Surface Mount is used to mount it. The HC/UHfamily includes it. With its 74HCseries designation, it can be used for a range of applications. A logic type of Binary Counter is adopted. The operating temperature should be set at -40°C~125°C. In this case, it is mounted with a Surface Mounttype. Providing a supply voltage of 2V~6Vallows it to operate more reliably. Each element in the array stores 12 bits. The device contains information consisting of 14bits. It should be noted that there are more related parts under the 74HC4060base part number. The device requires a supply voltage of [0]. As low as 2V Vsup is the minimum supply voltage. Typically, the supply voltage (Vsup) is limited to 6V. As long as 8μAis maintained, it consumes quiescent current.
74HC4060DB-Q100J Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
12 bits per element
Operating supply voltage of 5V
74HC4060DB-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC4060DB-Q100J Counters & Dividers applications.
- Frequency dividing circuits
- Dual Up Counters
- Control counters
- Time Out Timer for Consumer-Application Industrial Controls
- DIVISION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Frequency division
- Digital multiplexing and demultiplexing
- Up Counters
- POWER COMPUTATION
