74HC4060DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 450 ns |
| Turn On Delay Time | 450 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 95MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4060DB,112 Overview
In the 16-SSOP (0.209, 5.30mm Width)package, it is supplied. In order to configure it, it uses 16terminations. The supply voltage of 5V enables it operate in a fully flexible way. The 1elements are connected by wires. All component pins are equal to 16. It is packaged in the way of Tube. As part of the circuit, there are 16pins that connect other components. Initially, it appears to belong to the HC/UH family. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. It is assumed that the logic type is [0]. A temperature of -40°C~125°Cshould be set for the operating environment. This device is mounted in the Surface Mountposition. In the case of a supply voltage of [0], it operates more reliably. The array contains elements that store 14bits each. More related parts are available under its base part number 74HC4060. For the device to operate, a voltage supply of 5Vis required. As low as 2V Vsup is the minimum supply voltage. Up to 6Vis the maximum supply voltage (Vsup).
74HC4060DB,112 Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
14 bits per element
Operating supply voltage of 5V
74HC4060DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC4060DB,112 Counters & Dividers applications.
- LINEARIZATION
- Time Out Timer for Consumer-Application Industrial Controls
- Frequency dividing circuits
- Programmable binary and decade
- Fixed and programmable counters greater than 10
- Dual Up Counters
- Divide-by-N counting
- Frequency division
- Timing applications
- DIVISION
