74HC4066BQ-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 128Ohm |
| Base Part Number | 74HC4066 |
| Pin Count | 14 |
| Number of Circuits | 4 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 95Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 20ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~10V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4066BQ-Q100,11 Overview
As the electronic part is packed in 14-VFQFN Exposed Pad, international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around -40°C~125°C TA are extended for operation. An electrical component like this is included in the 14 series. SPST - NO switching circuits are used in these analog switch ics. There are 4 circuits in this switch device. Try searching with 74HC4066 if you're looking for variants. Analog switches have 128Ohm internal resistance. The datasheets for the 14 pins explain the functions. Users should never supply a voltage higher than 10V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. This digital switch can be operated with a current of 40μA. A voltage of 2V~10V is required for this switch device, which drains from a single voltage source. The Automotive, AEC-Q100 series contains it.
74HC4066BQ-Q100,11 Features
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz
74HC4066BQ-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HC4066BQ-Q100,11 Analog Switches & Multiplexers ICs applications.
- FTTH
- SDH
- Audio signal routing
- PBXs
- PCMCIA cards
- Signal routing between systems
- Remote Powered Equipment
- Data switching
- Avionics
- Battery Powered Systems
