74HC4066DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 128Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4066 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Turn On Delay Time | 36 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 44 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 95Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 20ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4066DB,112 Overview
This electronic part is conveniently packaged in 14-SSOP (0.209, 5.30mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 14. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 14 pins. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for 74HC4066 variants of the analog switch ic. As far as internal resistance is concerned, it has 128Ohm. The datasheets for the 14 pins explain the functions. Users should never supply a voltage higher than 10V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. 40μA current would be enough for this multiplexer to operate. An analogue multiplexer drains from a single voltage supply at 2V~10V. There is a voltage range of 5V operating voltages for the electrical part. In order to operate the 4 inputs, there are several steps to follow.
74HC4066DB,112 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz
74HC4066DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC4066DB,112 Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- Data Acquisition Systems
- Video switching
- Battery Powered Instruments
- Routers
- Communication systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Optical Applications
- Medical
- Data switching
