74HC4066PW,112

30ns, 20ns SPST - NO 95Ohm DUAL Analog Switches 74HC4066 14 Pins 1μA 4.5V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HC4066PW,112
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 470
Description: 30ns, 20ns SPST - NO 95Ohm DUAL Analog Switches 74HC4066 14 Pins 1μA 4.5V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Operating Temperature	-40°C~125°C TA
Packaging	Tube
Published	2011
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HC4066
Pin Count	14
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	10V
Number of Channels	1
Number of Circuits	4
-3db Bandwidth	200MHz
On-State Resistance (Max)	95Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 20ns
Channel-to-Channel Matching (ΔRon)	3 Ω
Crosstalk	-60dB @ 1MHz
Switch-on Time-Max	30ns
Voltage - Supply, Single (V+)	2V~10V
Height Seated (Max)	1.1mm
Length	5mm
RoHS Status	ROHS3 Compliant

74HC4066PW,112 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. There are 14 terminations totally. A high-quality output is provided by the electrical component's 1 channels. A 4.5V voltage supply should turn on and run the electronic component. There are 14 pins injected into the electronic part body. These analog multiplexers are built based on SPST - NO switching circuits. A 4 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 74HC4066. Analogue multiplexers require a 2V~10V voltage to drain from a single voltage supply.