74HC4066PW,118
| Parameters | |
|---|---|
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Drain to Source Resistance | 142Ohm |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4066 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 10V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Output Current | 5.2mA |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 95Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 20ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
74HC4066PW,118 Overview
Packed in 14-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. The operating temperature is extended to around -40°C~125°C TA. A total of 14 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. A 4.5V voltage supply should turn on and run the electronic component. A total of 14 pins are injected into the body of the electronic part. Multiplexers built on a SPST - NO switching circuit are built. There are 4 circuits in this switch device. If you are looking for variants of the digital switch, trying search with 74HC4066. You can find the functions of the 14 pins in the datasheets. This analogue multiplexer requires a voltage of 2V~10V when it drains from a single voltage supply. There is 142Ohm Drain to Source resistance on this electronic part.
74HC4066PW,118 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
Drain-to-Source resistance: 142Ohm
74HC4066PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4066PW,118 Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Video switching
- Access Concentrators
- Modems
- Sample hold systems
- PDH Multiplexers
- Imaging
- Relay Replacement
- Precision test equipment
- Low-Voltage
