74HC4067D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Supply Current-Max (Isup) | 50mA |
| Turn-Off Delay Time | 290 ns |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Time (Ton, Toff) (Max) | 45ns, 45ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-on Time-Max | 450ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Normal Position | NO |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4067D,653 Overview
Shipping overseas is convenient due to the electrical component's packing in 24-SOIC (0.295, 7.50mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. Totally, there are 24 terminations. A electrical component with 16 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. There are 24 pins injected into the electronic part body. Circuits number 1 make up this analogue multiplexer. Try searching for 74HC4067 variants of the analog switch ic. This digital multiplexer has 120Ohm internal resistance. Datasheets for functions of 24 pins are available. Users should never supply a voltage higher than 10V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 16μA current. A voltage of 2V~10V is required for this switch device, which drains from a single voltage source. It can operate from 5V operating voltages. It is possible to transfer data over a 100MHz-bandwidth.
74HC4067D,653 Features
16 Channels
16μA Supply Current
Bandwidth: 100MHz
74HC4067D,653 Applications
There are a lot of Nexperia USA Inc. 74HC4067D,653 Analog Switches & Multiplexers ICs applications.
- Multiplexers
- Video switching
- Precision instrumentation
- Cable PC
- Digital cross connects (DSX-1)
- Voice over IP/DSL – Integrated Access Devices, Smart
- Industrial control systems
- Automotive applications
- Access Concentrators
- Private Branch Exchange (PBX)
