Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.209, 5.30mm Width) |
Number of Pins |
24 |
Weight |
220.105698mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Termination |
SMD/SMT |
Resistance |
120Ohm |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
9V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC4067 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Number of Channels |
16 |
Number of Circuits |
1 |
Max Supply Voltage |
10V |
Min Supply Voltage |
2V |
Operating Supply Current |
16μA |
Power Dissipation |
500mW |
Output Current |
7.8mA |
Max Supply Current |
16μA |
Number of Bits |
8 |
Propagation Delay |
5 ns |
Turn On Delay Time |
42 ns |
Logic Function |
Demultiplexer, Demux, Multiplexer, Mux |
Number of Inputs |
16 |
Supply Type |
Single |
Bandwidth |
100MHz |
Turn-Off Delay Time |
38 ns |
On-State Resistance (Max) |
120Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
On-state Resistance Match-Nom |
6Ohm |
Switch Time (Ton, Toff) (Max) |
45ns, 45ns |
Channel-to-Channel Matching (ΔRon) |
6 Ω |
Switch-on Time-Max |
63ns |
Switch-off Time-Max |
57ns |
Voltage - Supply, Single (V+) |
2V~10V |
Drain to Source Resistance |
180Ohm |
Height |
1.8mm |
Length |
8.4mm |
Width |
5.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74HC4067DB,118 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-SSOP (0.209, 5.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. 16:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~125°C TA is the extended operating temperature. Totally, there are 24 terminations. The electronic part provides high-quality output because it has 16 channels. Powered by a 9V voltage supply, the electrical part should be switched on and run. The electrical component body receives 24 pins. 1 circuits are used in this analogue multiplexer. Try searching with 74HC4067 to find analog multiplexer variants. It has an internal resistance of 120Ohm. To find out what the 24 pins do, please refer to the datasheets. A voltage higher than 10V should not normally be supplied to the switches. The analog switch ic is of the Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 2V. For this digital switch to work, 16μA current would suffice. The voltage required by this switch device is 2V~10V, draining from a single voltage supply. A voltage higher than 16μA may cause damage to the switch multiplexer. 5V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 16 inputs. 100MHz bandwidths enable data to be transferred. It has a Drain to Source resistance of 180Ohm ohms. It conducts in a 8-bit manner.
74HC4067DB,118 Features
16 Channels
16μA Supply Current
Bandwidth: 100MHz
Drain-to-Source resistance: 180Ohm
8-Bit
74HC4067DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC4067DB,118 Analog Switches & Multiplexers ICs applications.
- HDTV
- Avionics
- Frame Relay Equipment
- Medical
- Digital cross connects (DSX-1)
- Access Concentrators
- Mechanical reed relay replacement
- Battery Powered Systems
- Cell phones
- Fiber to the Home