74HC4067PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 290 ns |
| On-State Resistance (Max) | 120Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 45ns, 45ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-on Time-Max | 450ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4067PW,112 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Surface Mount. There is 16:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. 24 terminations have been made so far. A electrical component with 16 channels is capable of high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. It is part of the design of the 24 series that this electronic component is included. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HC4067. The internal resistance of this digital multiplexer is 120Ohm. You can find the functions of the 24 pins in the datasheets. normally, users should not supply switches with voltages higher than 10V. Analogue multiplexers of the Single supply type that are cost-effective. A low voltage of 2V should be applied to the electronic component. For this multiplexer to operate, 16μA current would be sufficient. Using only a single voltage supply, this analog switch requires 2V~10V voltage. 5V operating voltages are supported by the electronic component. There are 16 inputs to be operated. 100MHz bandwidths enable data to be transferred.
74HC4067PW,112 Features
16 Channels
16μA Supply Current
Bandwidth: 100MHz
74HC4067PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC4067PW,112 Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Audio/video switches
- Digital cross connects (DSX-1)
- Medical systems
- Battery Powered Systems
- Remote Powered Equipment
- Communication systems
- Remote wireless modules
- DVD-R
- SDH/SONET multiplexers
