74HC4067PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 120Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 290 ns |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Time (Ton, Toff) (Max) | 45ns, 45ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-on Time-Max | 63ns |
| Switch-off Time-Max | 57ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4067PW,118 Overview
The electrical component comes in 24-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~125°C TA. There are 24 terminations totally. A 16 channel electronic part produces high-quality output. A 9V voltage supply should turn on and run the electronic component. An injection of 24 pins is performed into the body of the electrical component. A 1 circuit is present in this switch device. Look for analog switch ic variants by searching with 74HC4067. Internally, this switch multiplexer has a resistance of 120Ohm. To find out what the 24 pins do, please refer to the datasheets. In normalcircumstances, users should not exceed 10V volts for the multiplexer. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 2V. 16μA current would be enough for this multiplexer to operate. A voltage of 2V~10V is required for this switch device, which drains from a single voltage source. Operating voltages range from 5V. There are 16 inputs to be operated. 100MHz-bandwidths can be used to transfer data between multiplexers.
74HC4067PW,118 Features
16 Channels
16μA Supply Current
Bandwidth: 100MHz
74HC4067PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4067PW,118 Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- Medical systems
- Switching Systems
- Digital Cross-Connects
- Medical
- DSUs
- Remote Powered Equipment
- Audio/video switches
- Video signal routing
- Frame Relay Equipment
